Rover 75 / MG ZT / MG6 Rear Wheel Bearing Kit inc 32mm Nut - RLB100292 - OEM-Q

In stock.
Now includes correct 32mm nut - most kits use a 36mm item which requires a thin-walled socket due to the layout of the hub. 

This item is a quality OEM-Q part, guaranteed to last. Includes new nut (needed when changing this part). 

Full rear wheel bearing kit for the Rover 75 / MG ZT / MG6 - all models except V8 models. 

Wheel bearings on the 75 and ZT are more important than other MG Rover vehicles, as they also provide the signal to the ABS sensor via an embedded magnetic ring within the bearing itself. Usually a bearing with a little play is acceptable, however on these vehicles any play or wear can give all kinds of ABS trouble.

Crunching of the pedal when braking, or the ABS light appearing above 7MPH are both symptoms of failed wheel bearings (plus of course the usual rumbling noise or detectable play).  

Our kits now include the correct original specification 32mm nut - most other kits include a 36mm item which can be difficult to fit due to the small clearance between the hex and the hub itself. 
The correct 32mm nut makes fitting a doddle! 

List price: ~£97 / bearing kit

3 Year Warranty on this item.

IMPORTANT - make sure the Grease Cap RLF10001 is present and refitted when replacing this bearing. If the cap is missing, water and dirt will enter the bearing and cause premature failure. 
Order here if needed: Grease Cap - 75 / ZT Rear Wheel Bearing

Stock location: CE3